PORTOHERC MOTORI
The classic timing of a timed belt management goes back to the past. With the advancement of technology in all areas changing the customer's wishes are shrinking.
Motor for rolling shutters Porto MP40.16 – 10 Nm , 17 Rpm, 16kg
Motor for rolling shutters with an integrated central Porto MPC40.16 – 10 Nm , 17 Rpm, 16kg
Motor for rolling shutters Porto MP16.38 – 10 Nm , 17 Rpm, 16kg
Memorizing a Porto motors with an integrated remote control unit D15N
Step 1: Connect the motor to the voltage and connect: Brown from the engine with black from the inlet, blue from the engine with the blue from the add, yellowish from the engine with yellow from the inlet.
Step 2: By twisting the motor on the current, 2 tons (beep beeps)
Step 3: Press the button P2 located next to the battery in the remote to hear 1 tone (beep) to let go and press the key to hear 1 tone (beep) release button.
Step 4: On the remote select the desired channel and press the button up, you hear 5 fast tones (beep beep beep beep) let go up
The center is stored remotely.
In the event that you press the up of the engine down, repeat all three steps and press the down button. You can memorize 15 switches on the remote D 15.
When engine length is reduced, the engine must be in axle. When encoding the next switch, the current power supply must be interrupted.
Contact us…
